June 21, 2015
We helped contribute to this About.com article about the hardware, DIY electronics, firmware, and slicing software you'll need to get started building your own 3D printer.
Building Your First 3d Printer Is Easier Than Ever.
More in-depth stuff coming soon.
January 2016 (1)
June 2015 (2)
May 2015 (1)
April 2015 (2)
March 2015 (2)
February 2015 (2)
Design tips for parts that warp while printing
January 9, 2016
Building Your First 3d Printer Is Easier Than Ever
Voxel OX, our very own 3D printer design!
June 3, 2015
No slip power supply mount clip bracket for any width aluminum extrusion 20mm Openbuilds v-slot / Misumi
May 25, 2015
How to Make Voronoi Patterns with Autodesk® Meshmixer
April 30, 2015
Big layer heights with E3D's Volcano nozzles!
April 14, 2015
"Little Dipper" SLA/DLP 3D printer for under $500 (projector included) by Protobuilds on Instructables.
March 16, 2015
3D printed M5 tap jig for aluminum extrusion
March 10, 2015
Inductive Sensor Auto-leveling Mod for Makerfarm Kits
February 12, 2015
ProtoBuilds news blog - Welcome!